For Your Own Custom Printing Needs, Be Sure To Visit Printing Host Today!

[How To] Install Custom XMB Waves on PSP

[How To] Install Custom XMB Waves on PSP
Subscribe, Rate and Comment!

Don’t forget to Subscribe to Pr0H4x3r:

*I can not be held liable if you brick your PSP. If for whatever reason your PSP does brick, leave a comment and I will do my best to help you fix it.

*This works on the PSP Slim and Fat, but if you tried it and it worked successfully on the PSP 3000 please leave a comment saying that you tried it and it worked.

*You must have Custom Firmware! This should work on CFW 3.71-M33 and up. I will be using 5.50 GEN-D3


*Before attempting this make a backup of your flash0 folder (I will show you how to do this in the tutorial)

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –


176 XMB Wave Pack.rar:


– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –


1)Download the 176 XMB Wave Pack.rar (Link is above).
*You will need WinRar installed to be able to open and extract the folder inside the file (Link also above).

2) Double click on the .rar file and it will open in WinRar. Drag and drop the “176 XMB Wave Pack” folder onto the desktop.

3) Go into the recovery menu on your PSP
(Hold down the power switch until your PSP turns completely off, then hold R-Trigger and turn on your PSP)

4)Plug in your USB Cable to your PSP with the other end in your computer.

5) On your PSP select “Advanced”, then select “Toggle USB (flash0)”

6) On your computer you will be prompted. Open the folders (flash0 folder) and back up everything!

7) Open the “vsh” folder and then open the “resource” folder.

8) Open the “176 XMB Wave Pack” folder on your desktop.

9) Each sub-folder should include a picture of the xmb wave and a “.rco” file. If the file name is “system_plugin_bg.rco” then it will work. If the file isn’t named that then rename it to that or else it won’t work!

10) Find a XMB Wave that you like. Then drag and drop the .rco file into your PSP’s “resource” folder.
*When it asks you if you want to replace the original folder select “yes”!

11) On your PSP select “Back” and then select “Exit” to exit the Recovery Menu and your PSP will reboot with your new XMB Wave!

12) Customize the colors and themes in the theme settings and have fun!
*I didn’t have time to mention this in the video but if you like the icons of one of your themes then apply that theme. You will notice that your background will change to the theme’s background. Now to put that back to your new XMB Wave just go to the “Background” option in your “Theme Settings” and select classic. You will now have your theme’s icons with your XMB Wave!

13) Subscribe to me, Pr0H4X3r, rate and comment!

Thanks, Peace

Thanks! You've already liked this

PANINI FIFA Women’s World Cup Canada 2015 Stickers Album Box Break

PANINI FIFA Women’s World Cup Canada 2015 Stickers Album Box Break
►Buy this box online on eBay here
►Buy one on Amazon here
Here is previous video which includes album review
If you want to see me dancing and pulling 5 shiny stickers from 2 packs skip to 25:03

In this video I opened a box of Panini Women’s World Cup 2015 Canada. Each pack has 5 stickers. Box contains 50 packets. Total amount of stickers per box is 250. For more info on this album check our website at

Our site :


Our Facebook :

Our Twitter :

Thanks! You've already liked this

Phil Harvey Gladius: An enormous & wonderful homage to the Roman short sword

Phil Harvey Gladius: An enormous & wonderful homage to the Roman short sword
Aside from the monstrous proportions that grabs your attention initially, the detail work, level of refinement and overall execution of this knife puts Phil Harvey in an elite class of knifemaker. It is masterfully crafted down to the smallest (pun intended) detail. While this model may not be for everyone, it is a showstopper in every respect, and I am very fortunate to have stumbled across him on Instagram because I feel that this is one of the most well made full custom folders I’ve ever owned.

Check out Phil on IG at: @philharveyblades

Thanks! You've already liked this

How To Apply a Die Cut Decal or Sticker to Your Car Window

How To Apply a Die Cut Decal or Sticker to Your Car Window
Custom vinyl decals:

This video tutorial features our VP of Business Operations, Bart Simpson, showing you — step by step — how to properly apply a die cut decal (or sticker) to the back of your car window.

Putting a decal or sticker on your car may sound like a simple process, but at we’ve received a ton of questions over the years asking what the proper application process is. Hence why we created this video!

When you order die cut decals from — one of the most common stickers used for use on car windows and as bumper stickers — it’ll come in two layers: 1) the pre-mask, which is usually white and 2) the liner, the layer where the decal sits.

First, remove the liner from the pre-mask in order to expose the decal and prepare it for application. However, before you try and adhere it to your car window’s glass surface, you must ensure it’s smooth, clean, and dry.

To properly clean the surface where the decal will reside, spray down the car window’s surface with a cleaning solution like RapidTac ( a combination of dish soap and warm water would work just fine, too). Then, use a rag or paper towel to wipe down the glass surface and make sure it’s clean.

Once the surface of your car’s window is clean, it’s time to apply your decal!

Remove the pre-mask from the liner. When you remove it, it’ll be easy to see the different sides of the decal: one side will have the decal artwork underneath a faint layer, while the other side will have the actual adhesive, which makes knowing which side to put on your car easy.

As you apply, smooth the decal with your hand to ensure the bond of the adhesive to the glass is strong. As Bart says in the video, that added pressure isn’t enough to ensure a strong, near-permanent bond.

You’ll need to use either a squeegee or a credit card and run it along the decal to ensure all the angles and cuts of the die cut decal are firmly adhered to the glass and will not cause wrinkles or lift the decal off completely.

After ensuring the decal has bonded with your car’s window, you’re ready to expose your decal’s artwork!

Start pulling the top layer off from one corner, extremely slowly. Don’t pull the top layer straight up, rather down toward your body and away from the glass surface. Slowly continue to pull the layer off until the decal is completely exposed!

Congratulations! With Bart’s help, you’ve just learned how to properly apply a die cut decal to your car window.

Thanks! You've already liked this

Austin Flatbed UV Printing

Austin Flatbed UV Printing
Austin Flatbed Printing

Austin Flatbed Printing Direct To Substrate UV Printing

Austin Direct to Substrate Flatbed UV Printing. Lexan Signs, GatorBoard, UltraBoard, Coroplast, Austin Foamboard Printing, Acrylic & PVC Printing.

(512) 222-8892

Thanks! You've already liked this

How to: Add Custom Content on The Sims 2! *UPDATE 2015*

How to: Add Custom Content on The Sims 2! *UPDATE 2015*
Hi lovely Simmers! It’s been a long time since I created a video, and therefore I’ve decided to make an updated version on how to add custom content on Sims 2. Since my Audio is pretty bad, and I was really tired, the steps will be listed manually:

1. Check your Operating System.
~ To do so, on Windows 7 you will click on Start Menu and Right click on Computer to see if you have 32-bit or 62-bit.
2. Search “WinRAR” on its website or on download.cnet.

Notice: Make sure you pick the right one. If you don’t, it the application will NOT download correctly.
2. Once downloaded, find EA Games folder and click on it, then click on “The Sims 2.” It will show different folders in there. Then, create a folder called “Downloads” You MUST put it exactly how I wrote it or the game will NOT identify it correctly.
3. Go on (HIGHLY RECOMMENDED) or and find whatever item you’d like.
The file might be already .rar or .zip, once downloaded right click and “Extract to “XXXX” (xx is where your product name is)
4. Copy the extracted file and place it in your downloads folder.

And done! I tried making this easy as possible, but if you’re dealing with any problems, feel free to comment below, comment, sub, and share with your Sims 2 friends!

Thanks! You've already liked this

Shopkins Sticker Album with Collectible Stickers

Shopkins Sticker Album with Collectible Stickers
Shopkins Sticker Album review by Toy Genie Surprises. In this video, I review the new Shopkins Sticker Album. This sticker album starter pack comes with 5 packs of sticker from Season 1, Season 2, and Season 3. I also opened up a full box of collectible stickers.

Subscribe Here:

Here are the links to my videos in the annotation:

*NEW* Shopkins Shopping Cart Sprint Game with Exclusive Carts:

Shopkins Shoppies Dolls and Playsets with Blind Baskets:

Shopkins Crayola Mess Free Coloring Puzzle with Cheeky Chocolate:

Here are more of my videos in playlists:

Shopkins Season 3 Playlist:

Disney, Frozen, and Princesses Playlist:

My Little Pony Friendship Games Equestria Dolls, Playsets, and Blind Bag Surprises Playlist:

ABC123 Kids Preschool Learning With Toys and Play Doh Playlist:

Paw Patrol Surprises with Play Doh and Learning Playlist:

Sheriff Callie’s Wild West Play Doh Surprise Eggs Playlist:

Blind Bags, Blind Baskets, Mystery Boxes, Surprise Eggs Playlist:

Fashems and Mashems Playlist:

Hello Kitty Rements and Surprises Playlist:

Orbeez Playlist:

Peanuts Movie Toys Playlist:

Funko Pop and Funko Mystery Minis Playlist:

Please share this video of Shopkins Sticker Album with Collectible Stickers:

Music: YouTube

Thank you for watching my videos,

Toy Genie Surprises

Please support my channel by liking, subscribing, and sharing my videos. :)

Thanks! You've already liked this

Load More